Garage Door Spring Repair Cost in St. Cloud, FL (2026)

Replacing garage door springs costs $150 to $350 for a typical single door, with a national average of about $250, according to HomeAdvisor and Angi. Torsion springs run $75 to $150 each installed, and extension springs run $50 to $100 each. Your St. Cloud price depends on door weight, spring type and how many springs are replaced.

St. Cloud FL Garage Door Repair is a referral service. When you call, we connect you with an independent local garage door technician who confirms the final price and performs the work.

Broken torsion spring with a visible gap above a garage door

How Much Does It Cost to Replace a Garage Door Spring?

The national figures below come from HomeAdvisor (updated June 17, 2026) and Angi (updated October 30, 2026). HomeAdvisor says most homeowners spend between $75 and $500 in total, and Angi says jobs can reach $500 depending on the door setup. These are national ranges, not St. Cloud quotes. Use them to judge whether a quote is reasonable, and ask for the garage door spring repair price in writing before work starts.

JobNational cost rangeSource
Springs on one door (usually two springs)$150 – $350 (average about $250)HomeAdvisor, Angi
Torsion spring, per spring, installed$75 – $150HomeAdvisor, Angi
Extension spring, per spring, installed$50 – $100HomeAdvisor, Angi
Torsion spring, part only$30 – $100HomeAdvisor
Extension spring, part only$15 – $45HomeAdvisor
Springs on two single doors (four springs)$275 – $425HomeAdvisor
Larger springs for a double (two-car) door+$15 – $30 per springHomeAdvisor
Commercial-grade springs$150 – $300HomeAdvisor, Angi
Convert extension to torsion springs$400 – $800HomeAdvisor, Angi
Convert torsion to extension springs$250 – $500Angi
Lift cable replacement$75 – $200HomeAdvisor
Labor only (residential)$75 – $150HomeAdvisor, Angi
National ranges from HomeAdvisor and Angi. Local prices vary; the technician confirms your price before any work.

Torsion Spring vs. Extension Spring Replacement Cost

Most garage doors use one of two spring systems. Torsion springs sit on a metal bar above the door and twist to lift it. Extension springs run along the horizontal tracks on each side and stretch as the door closes. Torsion springs cost more to replace, but HomeAdvisor and Angi both note they last longer, and Angi calls them generally safer.

Torsion springsExtension springs
Where they areOn a bar above the door openingAbove the horizontal tracks, one on each side
Installed cost per spring$75 – $150$50 – $100
Part only$30 – $100$15 – $45
Rated life (HomeAdvisor)10,000 – 20,000 cycles, about 8 – 15 years8,000 – 15,000 cycles, about 7 – 12 years
Safety notesExtreme tension when the door is closed; winding needs proper bars and trainingNeed a containment (safety) cable through each spring so broken parts can’t fly loose
Costs and cycle ratings from HomeAdvisor and Angi. Containment cable requirement from DASMA TDS 151.

If your door has extension springs, check that a cable runs through the center of each one. DASMA’s inspection guidelines list an extension spring containment system as a required item, because a spring that snaps without one can whip across the garage. Converting from extension to torsion springs costs $400 to $800, according to HomeAdvisor and Angi. It can be worth it if you are replacing worn extension springs and hardware anyway.

Cost to Replace One Spring vs. Both Springs

Most doors have two springs. HomeAdvisor says you will almost always have two springs per door and should replace both at the same time. That is why the typical job price ($150 to $350) covers a pair, not a single spring.

Here’s why. Both springs were installed the same day, carry the same door and have the same number of cycles. When one breaks, the other is usually close behind. Putting one new spring next to a worn one also leaves the door unevenly balanced, which wears out cables, rollers and the opener faster. You’ll likely pay for a second service call when the old spring goes.

The One Exception

If your springs were replaced at different times and you have paperwork showing one is nearly new, replacing only the broken spring can be reasonable. Ask the technician to confirm both springs are the correct size for your door’s weight.

How to Tell It’s a Broken Spring

Most St. Cloud homeowners find out the same way: a loud bang from the garage, then a door that won’t budge. Before you call, check for these signs:

🔊 A loud bang, then a dead door
The spring snaps under tension, and the sound can carry through the whole house.

👁️ A visible gap in the coil
Look at the torsion spring above the door. A broken spring shows a clear gap where the coil separated.

🏋️ A door that feels very heavy
A balanced door lifts easily. With a broken spring, nearly all of the door’s weight is on you or the opener. Don’t force it.

⚙️ A straining opener
The motor hums and the door lifts only a few inches, or the opener stops and reverses.

↔️ Crooked, jerky movement
On a two-spring door, one broken spring can make the door lift unevenly and bind in the tracks.

⚠️ Stop Using the Door

DASMA’s homeowner checklist says that if a spring is broken, do not operate the door until the spring is replaced. Every cycle with a broken spring overloads the opener and can strip its gears, fray cables or bend tracks, which turns a spring job into a bigger repair. Unplug the opener and call (407) 674-3803.

DIY vs. Professional Spring Replacement

The parts are cheap: HomeAdvisor lists torsion springs at $30 to $100 each and extension springs at $15 to $45. The rest of the installed price is labor, and with springs that labor is mostly about safety. DASMA’s technician guidance (TDS 175) says doors “move with the help of springs under extreme tension, and can cause serious injury or death,” and that only trained door systems technicians should remove, repair or adjust them.

  • Correct sizing: springs are matched to the door’s weight and height. A wrong wire size or length leaves the door out of balance.
  • Proper tools: torsion springs are wound with solid winding bars, not screwdrivers or pliers.
  • Speed: HomeAdvisor says a skilled technician can replace two springs on a standard door in about 30 minutes to an hour.
  • The rest of the system: a pro checks cables, drums, bearings and the opener’s reversal while the door is apart.

What Affects Spring Replacement Cost in St. Cloud

National ranges are a starting point. These local factors push a St. Cloud quote up or down:

  • Door size and weight. If you have a two-car (double) door, HomeAdvisor says its springs often cost $15 to $30 more per spring. Angi notes taller doors need longer springs (for example, 25-inch springs on a 7-foot door and 27-inch springs on an 8-foot door), a $5 to $10 difference.
  • Wind-rated doors. Doors built to Florida’s wind-load rules often carry extra reinforcement, so the springs have to be sized to the door’s actual weight. See hurricane and impact garage doors for more.
  • Humidity and rust. HomeAdvisor lists rust among the three most common reasons garage doors break, and Angi says moisture causes spring rust and that homeowners in coastal areas may need to lubricate springs several times a year. St. Cloud’s humid climate makes rust worth watching, so ask the technician about coated springs and how often to lubricate them.
  • Worn companion parts. If the cables are frayed, replacing them during the same visit saves a second trip. HomeAdvisor puts cable replacement at $75 to $200. Learn more about garage door cable repair, or off-track door repair if the door came out of its tracks.
  • Urgency. Angi notes emergency and after-hours service usually costs more than a standard appointment. If the car isn’t trapped and the door is safely closed, a scheduled visit is usually the cheaper option.
  • Opener damage. An opener that strained against a broken spring may have stripped its drive gear. If it now hums without moving, see garage door opener repair.

How to Read a Spring Repair Quote

What a Legitimate Quote Should Include

  • Spring specs: wire size, inside diameter and length, or at least “matched to your door’s weight.” A pro measures.
  • Cycle rating: HomeAdvisor rates torsion springs at 10,000 to 20,000 cycles. Higher-cycle springs cost more but last longer.
  • Warranty in writing: what the parts and labor warranties cover, and for how long.
  • An itemized total before work starts: parts, labor and any extras listed separately, not one mystery number.

Red Flags in a Spring Quote

  • The instant price drop: a fair price doesn’t fall by hundreds of dollars because you hesitated.
  • No itemized bill: a single total with no breakdown of parts and labor.
  • “Decide right now” pressure: a broken spring is urgent, but you still have time to get a second quote.
  • Cash only or full payment upfront.
  • No company name on the truck, invoice or receipt.

💡 3 Questions to Ask Before Work Starts

  1. “What size and cycle rating are the springs you’re installing?”
  2. “Is that price for one spring or the pair, and what’s the warranty?”
  3. “Can I get that itemized in writing before you begin?”

Repair the Spring or Replace the Door?

A broken spring alone is rarely a reason to replace the whole door. Angi puts a new garage door at $750 to $1,700, compared with an average of about $250 for spring replacement. Replacement starts to make sense when several parts are failing at once, the panels are damaged or rusted, or the door doesn’t meet Florida’s wind-load rules. See repair or replace your garage door and garage door installation in St. Cloud.

Broken Spring in St. Cloud? Get a Price First

Call (407) 674-3803 and we’ll connect you with an independent local technician. Ask for an itemized price before any work starts.

Frequently Asked Questions

How much does it cost to replace a garage door spring?

Most homeowners pay $150 to $350 to replace the springs on one garage door, and the national average is about $250, according to HomeAdvisor and Angi. Jobs can run as low as $75 or as high as $500, depending on the spring type, how many springs are replaced and the door size. Your technician confirms the price before starting.

How much does it cost to replace a torsion spring?

HomeAdvisor and Angi put torsion spring replacement at $75 to $150 per spring, including parts and labor. The spring alone costs about $30 to $100. Most doors have two torsion springs, and both should be replaced at the same time.

How much does it cost to replace an extension spring?

Extension springs cost $50 to $100 per spring installed, according to HomeAdvisor and Angi. The part alone costs about $15 to $45. Converting from extension to torsion springs costs $400 to $800.

Should both garage door springs be replaced at the same time?

Yes. HomeAdvisor advises replacing both springs because the door needs balanced tension to run safely, and the old spring has the same age and wear as the one that broke. Mismatched springs can make the door lift unevenly.

Can I open my garage door with a broken spring?

You shouldn’t. DASMA, the garage door manufacturers’ association, says that if a spring is broken you should not operate the door until the spring is replaced. Without working springs the door can drop suddenly, and running the opener strains its motor and gears.

Is it safe to replace a garage door spring myself?

No. DASMA warns that garage door springs are under extreme tension and can cause serious injury or death, and that only trained door systems technicians should remove, repair or adjust them. The parts cost less than the installed price, but the risk is not worth the savings.

How long do garage door springs last?

HomeAdvisor rates torsion springs at 10,000 to 20,000 cycles, about 8 to 15 years, and extension springs at 8,000 to 15,000 cycles, about 7 to 12 years. Heavy daily use and rust shorten that.

How long does garage door spring replacement take?

HomeAdvisor says a skilled technician can replace the two springs on a standard door in about 30 minutes to an hour. Converting spring types or working on several doors takes longer.

Get Your Springs Fixed Right the First Time

Call (407) 674-3803. We connect homeowners across St. Cloud, from Downtown and the Lakefront to Stevens Plantation, Harmony and Canoe Creek, with local garage door pros.

Similar Posts